Fuel supply system: Multipoint Injection
Ignition: Positiv Ignition (Electronic map-controlled ignition)
Atmospheric/Supercharged: Natural Aspirated
Fuel type: ROZ 95
Oil capacity in initial fill (I): 4.3
Alternator (A): 110
Battery (Ah/A): 59
Acceleration 0-80 km/h (s): 9.6
Acceleration 80-120 km/h (s) at V: 17.9
Acceleration 1000 m (s): 35.9
Type: 5D
Wheelbase (mm): 2,564
In running order with driver (kg): 1,102
In running order with driver (kg) Front / Rear: 655/447
Maximum weight allowed (kg): 1,620
Maximum weight without brake (kg): 540
Maximum weight w/brake 8% (kg): 1,000
Maximum weight w/brake 12% (kg): 800
Gearbox type: MQ200-5F
Rims: 5.5JX15 ET40 - 6.5JX16 ET47 - 7JX17 ET51 - 7JX18 ET51
Tyres: 185/65 R15 88H - 185/65 R15 88V - 195/55 R16 91V XL 215/45 R17 91W XL - 215/40 R18 91W XL
Front suspension: Independent type McPherson - coil springs - hydraulic shock absorber [Variable shock absorber settings (switchable shock absrober)]
Rear suspension: Semirigid axle, coil springs and hydraulic shock absorber [Variable shock absorber settings (switchable shock absrober)]
Steering System: C-EPS (Column Electric Power System)
Turning diameter (m): 10.6
Brake system: ESC Standard (including HHC, EBA, TCS, EDS, RKA, XDS)
Type front and rear brakes: Ventilated front brakes / Drum brakes in rear axle
Front brakes (mm): Ø256x22
Rear brakes (mm): TB228x42
Multipoint injection
Positive Ignition (Electronic map-controlled ignition)
Natural aspirated
ROZ 95
4.3
110A (8GG)
59Ah (J0S)
*With 215/40 R18 91W tyres
The above image represents the measurements of the Reference, Style and Xcellence trims. The height measurements of the FR trim may vary slightly.
Our global range of cars and product specifications varies from country to country. Please, visit your local SEAT website to know more about the product offer available for you.
“The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. For further information on the differences between the WLTP and NEDC, please visit our web page http://www.seat.com/company/wltp-standard.html
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such time as this is required by law. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle.)
For more information about official fuel consumption and CO2 emissions values in new passenger cars, check the “Guide to passenger cars for sale in Spain, showing CO2 consumption and emissions”, available at all dealerships and on the webpage of the Institute for Diversification and Saving of Energy (http://coches.idae.es/PDF/GuiaFinalN.pdf.)“