Fuel supply system: TSI Direct injection
Ignition: Electronic map-controlled ignition
Atmospheric/Supercharged: Turbo charged
Fuel type: ROZ 95
Oil capacity in initial fill (I): 4.5
Alternator (A): 110-180
Battery (Ah/A): 59-68 / 320-380
Acceleration 0-80 km/h (s): 5.9
Acceleration 80-120 km/h (s) at V: 10.3
Acceleration 1000 m (s): 30.0
Type: A-SUV
Wheelbase (mm): 2,638
In running order with driver (kg): 1,355
In running order with driver (kg) Front / Rear: 794/561
Maximum weight allowed (kg): 1,900
Maximum weight without brake (kg): 670
Maximum weight w/brake 8% (kg): 1,850
Maximum weight w/brake 12% (kg): 1,800
Gearbox type: MQ250-6F (TKN)
Ratios I: 4.111
II: 2.118
III: 1.360
IV: 1.029
V: 0.857
VI: 0.733
VII: -
R: 2.222
Group 1 ratio: 3.647
Group 2 ratio: -
Group 3 ratio: -
Speed 1000 rpm in IV/V (km/h): -
Rims: 7J x 18 ET45
8J x19 ET45
Tyres:215-50 R18 92W
235-40 R19 96Y
Front suspension: Independent type McPherson - coil springs- hydraulic shock absorber
Rear suspension: Semirigid axle, coil springs and hydraulic shock absorber
Steering System: R-EPS (Rack Electric Power System); in Xcellence and FR: Progressive steering
Turning diameter (m): 10.8
Brake system: Dual hydraulic circuit and brake system diagonal split with brake booster
Type front and rear brakes: Front ventilated disc brakes and rear solid disc brake
Front brakes (mm): 312 x 25
Rear brakes (mm): 272 x 10
TSI Direct injection
Electronic map-controlled ignition
Turbo Charged
ROZ 95
4.5
110-180
59-68 / 320-380
*With 235/40 R19 96Y tyres
The above image represents the measurements of the Reference, Style and Xcellence trims. The height measurements of the FR trim may vary slightly.
Our global range of cars and product specifications varies from country to country. Please, visit your local SEAT website to know more about the product offer available for you.
“The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. For further information on the differences between the WLTP and NEDC, please visit our web page http://www.seat.com/company/wltp-standard.html